The adapters are specially designed to provide an easier and safer solution. With the MQB48 solderless adapters, you only need to connect the adapter to the board with reference to the positioning points shown in the connection diagram and then apply the clips. After such simple and safe operations, you can easily read and calculate the anti-theft data.
Function:
MQB Add key, All Keys Lost (AKL requires sync data from 3rd party)
Vehicle List:
VW: Golf7 CC Magotan T-ROC TAYRON Sagitar Bora Lamando Variant Lavida TiguanL Teramont
Audi: A3 Q2 Q3L
Skoda: Octavia, Kodiaq, Superb, Karoq
NEW UPDATE (April 2023)
VVDI Prog adds VAG IMMO4 MQB-LOCK (D70F35xx) read and write
VVDI2 Supports Immo4-NEC35xx dashboard which not support OBD(All key lost and new VDO)- require MQB48-NEC35xx(Lock) license
Cluster List:
MQB Cluster D70F3532 (A2C81589500)-A
Dash type: 560G920750
MQB cluster D70F3529
dash type 5G1920730B
MQB Cluster D70F3526 (A2C81589700)-C
dash type: 3G0920791B
MQB Cluster D70F3526 (A2C81589700)-B
dash type: 8V0920861
MQB Cluster D70F3526 (A2C81589700)-A
dash type:6C0920740A 6C0920940
MQB Cluster D70F3525 (A2C81589600)-B
dash type: 8V0920861
MQB Cluster D70F3525 (A2C81589600)-A
Dash type:56G920730C
Problem:
Trying to read VAG MQB D70F3532 cluster with xhorse vvdi prog and mqb solder free adapter. 12V to the adapter and prog. Failed to read cluster data, error try frequency failed. Only yellow indicator turns on. Any solution?
Possible solution:
Don’t connect adapter to cluster, only connect MQB adapter with vvdi prog, with 12V in both VVDI Prog and MQB Adapter.
If only has frequency failed error, you have to measure FLMD0 voltage.
Go and read by TEST_OPTION_15, measure the FLMD0 voltage, normally the FLMD0 should be 3.3V, otherwise, the vvdi prog is faulty. Need to send back for repair.